User’s Manual
5-4
The Keyboard
Instant security:
Press
Fn
+
F1
to blank the screen to prevent others from
accessing your data. To restore the screen and original settings, press any
key or press the Dual Pointing Device. If a screensaver password is
registered, a dialog box will appear. Enter the screensaver password and
click
OK
. If no password is set, the screen will be restored when you press
any key or press the Dual Pointing Device.
Power save mode:
Pressing
Fn
+
F2
changes the power save mode.
If you press
Fn
+
F2
in a Windows environment, the Power Save Mode is
displayed in a dialog box. Continue holding down
Fn
and press
F2
again to
change the setting. You can also change this setting through the
profile
item
in TOSHIBA Power Saver.
Standby:
When you press
Fn
+
F3
, the computer enters Standby Mode. To
avoid entering Standby Mode unexpectedly, a dialog box appears for
verification. However, if you select the check box, it will not appear in the
future.
Hibernation:
When you press
Fn
+
F4
, the computer enters Hibernation
Mode. To avoid entering Hibernation Mode unexpectedly, a dialog box
appears for verification. However, if you select the check box, it will not
appear in the future.
Display selection:
Press
Fn
+
F5
to change the active display device.
When you press these hot keys, a dialog box appears. Only selectable
devices will be displayed. Hold down
Fn
and press
F5
again to change the
device. When you release
Fn
and
F5
, the selected device will change. If
you hold down these hot keys for five seconds the selection will return to
LCD
.
