background image

User’s Manual

4-7

Operating Basics

Writing CDs on DVD-ROM&CD-R/RW drive

Depending on the type of drive installed, you may be able to write CDs. The 

DVD-ROM&CD-R/RW drive lets you write as well as read CD-ROMs. 

Observe the precautions in this section to ensure the best performance for 

writing CDs. For information on loading and unloading CDs refer to the 

Using optical media drive section.

Before writing or rewriting

Please observe the following points when you write or rewrite the data.

We recommend the following manufacturers of CD-R and CD-RW 

media. Media quality can affect write or rewrite success rates.

CD-R: TAIYO  YUDEN  CO., LTD.

Mitsui  Chemicals  Inc.
MITSUBISHI  CHEMICAL  CORPORATION
RICOH  Co., Ltd.
Hitachi  Maxell  Ltd.

CD-RW: MITSUBISHI  CHEMICAL  CORPORATION

RICOH  Co., Ltd.

*For the special media listed below, the following manufacturers are  

recommended.

Multi-Speed and High-Speed CD-ROM: 

MITSUBISHI CHEMICAL CORPORATION, RICOH Co., Ltd.

Ultra-Speed CD-ROM: 

MITSUBISHI CHEMICAL CORPORATION

TOSHIBA has confirmed the operation of CD-R and CD-RW media of the 

manufacturers above. Operation of other media cannot be guaranteed.

CD-RW can generally be rewritten about 1,000 times. However, the 

actual number of rewrites is affected by the quality of the media and the 

way it is used. 

Be sure to connect the AC adaptor when you write or rewrite.

Be sure to close all other software programs except the writing 

software.

Do not run software such as a screen saver which can put a heavy load 

on the CPU.

Operate the computer at full power. Do not use power-saving features.

Do not write while virus check software is running. Wait for it to finish, 

then disable virus detection programs including any software that 

checks files automatically in the background.

Do not use hard disk utilities, including those intended to enhance HDD 

access speed. They may cause unstable operation and damage data.

CD-R discs can be written to only once. CD-RW discs can be rewritten 

many times.

Summary of Contents for A2







































































































































































































Reviews: