background image

User’s Manual

xxii

General Precautions

WARNING

NOTE

Turn OFF the Wireless Communication switch of Wireless Products in a 

congested place, such as a crowded commuter train.
Keep this product away from a cardiac pacemaker at least 22cm.
Radio waves can potentially affect cardiac pacemaker operation, thereby 

causing respiratory troubles.
Turn OFF the Wireless Communication switch inside a medical facility or 

near medical electric equipment. Do not bring medical electric equipment 

close to the product.
Radio waves can potentially affect medical electric equipment, thereby 

causing an accident due to malfunction.
Turn OFF the Wireless Communication switch near an automatic door, fire 

alarm or other automatic control equipment.
Radio waves can potentially affect automatic control equipment, thereby 

causing an accident due to malfunction.
Do not turn ON the Wireless Communication switch in aircraft or in places 

that generate or can generate radio interference.
Radio waves can potentially affect them, causing an accident due to 

malfunction.
Monitor possible radio interference or other troubles to other equipment 

while the product is used. If any effect is caused, turn OFF the Wireless 

Communication switch.
Otherwise, radio waves can potentially affect other equipment, thereby 

causing an accident due to malfunction.
When using the product in a car, check with the automobile dealer if the 

car has an adequate electromagnetic compatibility (EMC).
Radio waves of the product can potentially hamper safe driving.
Depending on car model, the product can rarely affect car electronic 

equipment if it is used in a car.

Do not use the product in the following places:
Near a microwave oven or other environment which generates a 

elektromagnetic field
Near any place or equipment that generates static electricity or radio 

interference.
Depending on the environment, in a place where radio waves cannot reach 

the product.

Summary of Contents for A2







































































































































































































Reviews: