Tecra A2 User Manual Download

Page: 123 / 198

User’s Manual

7-8

HW Setup and Passwords

Wake-up on Keyboard

When this feature is enabled and the computer is in Standby Mode, you

can turn on the computer by pressing any key. It is effective only for the

internal keyboard and only when the computer is in Standby Mode.

LAN

Wake-up on LAN

This feature lets the computer’s power be turned on when it receives a

wake-up signal from the LAN.

Built-in LAN

This feature enables or disables the Built-in LAN.

USB

USB KB/Mouse Legacy Emulation

Use this option to enable or disable USB KB/Mouse Legacy Emulation. If

your operating system does not support USB, you can still use a USB

mouse and keyboard by setting the

USB KB/Mouse Legacy Emulation

item to

Enabled

Enables the Wake-up on Keyboard.

Disabled

Disables the Wake-up on Keyboard. (Default)

Enabled

Enables Wake-up on LAN.

Disabled

Disables Wake-up on LAN. (Default)

Do not install or remove an optional memory module while Wake-up on

LAN is enabled.

The Wake-up on LAN function consumes power even when the system is

off. Leave the AC adaptor connected while using this feature.

Enabled

Enables Built-in LAN functions. (Default)

Disabled

Disables Built-in LAN functions.

Enabled

Enables the USB KB/Mouse Legacy Emulation.

(Default)

Disabled

Disables the USB KB/Mouse Legacy Emulation.

Summary of Contents for A2







































































































































































































Search results

Summary of Contents for A2

Reviews:

Related manuals for A2

Brands by name

Popular brands

Tecra A2, User Manual

Search results

Summary of Contents for A2

Reviews:

Related manuals for A2

Brands by name

Popular brands