manualshive.com logo in svg

Tecra A2, User Manual

Get ready to unleash your eco-friendly adventures with the Velec A2 electric bike! Our Owner's Manual provides you with all the essential information you need for a smooth and enjoyable ride. Download the manual for free from manualshive.com to familiarize yourself with this incredible bike's features and maximize your riding experience.

Share
Download
background image

User’s Manual

xix

General Precautions

3. Set the time in 

System Time

.

4. Press 

End

 key. Confirmation message will appear.

Press 

Y

 key. BIOS setup will terminate and the computer will be rebooted.

CE compliance

This product and the original options are designed to observe the related 

EMC (Electromagnetic Compatibility) and safety standards. However, 

TOSHIBA cannot guarantee that this product still observes these EMC 

standards if options or cables not produced by TOSHIBA are connected or 

implemented. In this case the persons who have connected / implemented 

those options / cables have to provide assurance that the system (PC plus 

options / cables) still fulfils the required standards. To avoid general EMC 

problems, the  following guidance should be noted:

■

Only CE marked options should be connected / implemented

■

Only best shielded cables should be connected

Working environment

This product was designed to fulfil the EMC (electromagnetic compatibility) 

requirements to be observed for so-called “Residential, commercial and 

light industry environments”.
TOSHIBA do not approve the use of this product in working environments 

other than the above mentioned “Residential, commercial and light industry 

environments”.
For example, the following environments are not approved:

■

Industrial Environments (environments with a mains voltage >230V~)

■

Medical Environments

■

Automotive Environments

■

Aircraft Environments

Any consequences resulting from the use of this product in working 

environments that are not approved are not the responsibility of TOSHIBA 

Europe GmbH.
The consequences of the use of this product in non-approved working 

environments may be:

■

Interference with other devices or machines in the near surrounding 

area

■

Malfunction of, or data loss from, this product caused by disturbances 

generated by other devices or machines in the near surrounding area

After configuring the date and time it is recommended that you switch the 

computer on and then leave it in this state so that the  Real Time Clock 

battery can be charged.

If this product is supplied with a network port, please refer to the paragraph 

“Network connection”.

Summary of Contents for A2







































































































































































































Reviews:

No comments

Related manuals for A2

MSI FX620DX User Manual preview
FX620DX
Brand: MSI Pages: 102
Medion AKOYA E6221 User Manual preview
AKOYA E6221
Brand: Medion Pages: 100
Huawei 1174092 Quick Start Manual preview
1174092
Brand: Huawei Pages: 120
Lenovo 21AH00HXGE User Manual preview
21AH00HXGE
Brand: Lenovo Pages: 84
Lenovo 2384EHU - ThinkPad G40 2384 Hardware Maintenance Manual preview
2384EHU - ThinkPad G40 2384
Brand: Lenovo Pages: 164
Lenovo 21A2 User Manual preview
21A2
Brand: Lenovo Pages: 34
Lenovo 2776L9U Brochure preview
2776L9U
Brand: Lenovo Pages: 4
Lenovo 27463XU Hardware Maintenance Manual preview
27463XU
Brand: Lenovo Pages: 218
Lenovo 278182U - IdeaPad Y430 Dual Core T3400 2.16 GHz User Manual preview
278182U - IdeaPad Y430 Dual Core T3400 2.16 GHz
Brand: Lenovo Pages: 150
Lenovo 2958LEU Brochure preview
2958LEU
Brand: Lenovo Pages: 2
HP 6535b - Compaq Business Notebook Quickspecs preview
6535b - Compaq Business Notebook
Brand: HP Pages: 38
Samsung R480 Series Service Manual preview
R480 Series
Brand: Samsung Pages: 5
Samsung Q25 Installation Manual preview
Q25
Brand: Samsung Pages: 2
Samsung P460-44G Specifications preview
P460-44G
Brand: Samsung Pages: 2
Samsung P30 Installation Manual preview
P30
Brand: Samsung Pages: 2
Samsung P28 Installation Manual preview
P28
Brand: Samsung Pages: 2
Samsung R517 User Manual preview
R517
Brand: Samsung Pages: 80
Samsung R423 User Manual preview
R423
Brand: Samsung Pages: 87

Brands by name

Popular brands

Load more brands