Chapter 4 Software index
4-2
z
Remote/Local change function
•
Local mode
●
Run command
via
RUN/STOP
key
on the keypad
●
Frequency command
When C41=000: only UP/DOWN key on the keypad can control and F05 setting
has
no
effect
.
When C41=001: only VR on the keypad can control and F05 setting
has
no
effect
.
• Remote mode
●
Run command from Run parameter
(F04)
control setting
●
Frequency command from Frequency parameter
(F05)
control setting
•
Remote/Local change mode
on
keypad
is achieved by simultaneously pressing
▼
/RESET and
DATA/ENT.
Each successive operation toggles between local and remote.
Note: The inverter must be stopped.
