3
SAFETY
3.6
DANGER ZONES
The danger zone is defined as all of the area around the working vehicle.
For a detailed view of the area, refer to the manual for the working vehicle on which the equipment is installed.
It is forbidden to be in the danger zone and in the working vehicle operating area during operation.
DANGER!
NO ONE, EXCEPT THE OPERATOR, MAY BE IN THE INTERCHANGEABLE EQUIPMENT WORK AREA.
The interchangeable equipment is destined to be used by qualified operators who are properly instructed on its use, who are aware of problems that
could occur with lifting the materials as described in the
"Intended use
" section and who are conscious of the risks present in the work environment.
The interchangeable equipment is characterized by units and parts of interchangeable equipment that are considered dangerous. All of the areas
considered dangerous must be cordoned off in order to prevent access by unauthorized individuals when the interchangeable equipment is in motion.
All of the area involved in the work and movement of the equipment itself is considered dangerous and must therefore be cordoned off.
DANGER!
Post signs forbidding access to the work area
DANGER!
To access danger zones, operate safely and perform all operations and methods set forth in this chapter and the chapters for
"Installation
/ use and operation
".
Only authorized and specialized personnel may enter danger zones to perform operations.
Division: Tecnoter srl
Hyd. Magnet
LQMI
Ver. T
Page 16/38
Rev: 1.0a_En –
15/07/2018
!
!
!