GB / IE - 3
5410.253.00
Part 3
Maintenance
Cleaning and care of the appliance
Do not wash the appliance with jets of water because if water
gets into the electric components it could cause the appliance and
the safety systems to malfunction!
•
If the appliance won't be used for a long period of time, it should
be thoroughly cleaned and covered with a protective sheet of the
type commonly found in shops.
Malfunctions
Malfunctions do not always depend on the quality of the
components used. These appliances are manufactured using top
quality components. Malfunctions may be caused by voltage surges,
dust and/or dirt getting into the components.
In any case, if anomalies are noticed or suspected, turn the
appliance off and disconnect it from the mains. Call the authorised
repair service.
Unauthorised persons should never attempt to repair the appliance, or carry out maintenance. Tampering with the appliance voids
the warranty!
Maintenance
No particular maintenance is necessary other than normal
cleaning. The appliance should be checked once a year by a repair
service. For this purpose a maintenance contract should be
stipulated.
Ecology and environment
Our appliances are studied and optimised, with lab tests, to
provide high performance and yields. However, to keep energy
consumption low (electricity, gas and water), we suggest not using
the appliance for any length of time if it is empty or in conditions that
compromise optimum yield.
All packaging materials are environment-friendly. They can be
kept without problem or burnt in a waste incinerator plant. The plastic
components that can be recycled are:
Polyethylene: external packaging material and/or pluribol film
Polypropylene: straps
Polystyrene foam: corner pieces, sheets and protection blocks
At the end of the appliance’s useful life, dispose of it properly.
90% of each appliance is made of metal (stainless steel, iron,
aluminated sheet, etc.) hence it can be recycled by the relative
recycling organisations in compliance with the standards in force in
your country.
Prepare the appliance for disposal, so it cannot be used any
more, by removing the power cable.
The Manufacturer declines any responsibility for damage caused by improper or incorrect installation or maintenance of the appliance, or
failure to observe safety regulations!
