Tecnogas FastPipe, Installation Manual And Declaration Of Warranty

Page: 19 / 108

FastPipe
®
installation manual and warranty statement
EN
19
Below is a list of terms and their intended meanings within this Manual:
• Manual
: this Installation Manual, including the Warranty Statement, for using FastPipe
®
and its
accessory components;
• FastPipe
®
or the
Product
: the innovative multilayer plastic tube;
• FastPipe
®
System : the set of tube, fittings and equipment required to create a cooling circuit;
• FastPipe
®
Starter Kit
:
FastPipe
®
tube along with the accessories required for its installation and
to insert and crimp the fittings, as specified in the paragraph “Contents of FastPipe
®
Starter Kit ”;
• Connection Kit
: nut, bushing and insert to connect
FastPipe
®
to the air-conditioning Units;
• Accessories
or
Accessory components
: the crimping tool, dies, tube cutter, fittings and everything
else included inside
FastPipe
®
Starter Kit
;
• User Manuals
: the user or installation manuals for the air-conditioning Units and Accessories
(such as the electric screwdriver, torque wrench, air conditioner, etc.);
• Tecnogas Warranty
: the manufacturer’s warranty for
FastPipe
®
;
• Units
: the air-conditioning machines connected by
FastPipe
®
.
This Manual contains instructions for the correct installation of
FastPipe
®
and the construction of the
refrigeration circuit, of which it forms an essential component.
It is recommended to carefully follow all instructions provided and to keep the Manual for future
installations.
• FastPipe
®
is reserved exclusively for specialised technicians and installers in possession of the
certifications required by the relevant legislation in force in the country of installation.
• FastPipe
®
is made of innovative plastic polymers and manufactured in line with the highest
standards and technologies. The Accessories are made with high-quality components that
ensure a long product lifespan.
• FastPipe
®
requires the use of specific Accessories, designed to be used only with the Product.
When installing
FastPipe
®
it is strictly forbidden to use any tool other than those indicated below
or supplied with FastPipe
®
Starter Kit .
•
In order to extend the lifespan of the Product, it is recommended to utilise the appropriate tools
to tighten or loosen the fittings.
•
Observance of that contained in the enclosed User Manuals and regarding the other accessory
components is necessary for the correct installation of FastPipe
®
and the consequent construction
of the refrigeration circuit.
•
This Manual incorporates the regulatory framework in force at the time of the Product being sold,
reflecting the current advancements, science and technology.
• Tecnogas
, which reserves the right to periodically update this Manual, cannot be held responsible
for any inopportune updating of the same, in view of the changed regulatory or technical
landscape.
• For anything not expressly covered in this Manual, Tecnogas recommends compliance with all
the norms, laws, provisions and regulations that - even indirectly - govern the construction of a
refrigeration circuit.
Definitions
General warnings
i