User data transfer
The
TASFD6T
keypad supports the transfer of user informa on, ie each card / tag and PIN entered in the unit can
be copied to another device.
This opera on could be used in the case in which two units must be connected on which the same users must be
present.
The unit from which you want to copy the data will be indicated below as a Master Unit.
The unit on which you want to copy the data will be indicated below as an Accept Unit.
They can be transferred to up to 10 devices at a me.
WARNING:
-
The Master Unit and the Accept Unit must be
TASFD6T
;
-
The Master Code of the two units must be the same;
-
Perform the transfer opera on (as below) only on the Master Unit;
-
Perform the transfer opera on (as below) only on the Master Unit;
Ac vate the transfer on the Master Unit
Opera on
Keystroke combina on
Enter the programming mode
(Digit Master Code)
Ac vate transfer
Within 3 minutes, a green LED will flash to confirm the
correct opera on of the opera on
Exit programming mode
tecnoautomation
T.A. Tecno Automazione s.r.l.
- Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] -
www.tecnoautomation.com
-
www.tecnoautomazione.com