Tecnoalarm Tecnofire TFA2-596, Installation Manual

Page: 21 / 64

TFA2-596 - TFA4-1192
21
The table describes the functions and procedures for reporting of the LED on the front panel of the control panel.
As required by EN 54-2 provisions concerning light signals, the ON/OFF
fl ashing frequency of the LED is:
• 2.5s. ON / 2.5s OFF (slow fl ashing) for failure
• 0.5s ON / 0.5s OFF (fast fl ashing) for alarm
5-4 - Signaling LED
LED Color Description Signaling
ALARM
Red Fire alarm
Off No alarm
Flashing Fire alarm active (not acknowledged)
On Fire alarm active (acknowledged)
PREALARM
Red Fire prealarm
Off No prealarm
Flashing Fire prealarm active (not acknowledged)
On Fire prealarm active (acknowledged)
TECHNICAL
ALARM
Red Technical prealarm and alarm
Off No alarm
Flashing Technical alarm active (not acknowledged)
On Technical alarm active (acknowledged)
GENERAL
FAILURE
Yellow Failure
Off No failure
Flashing Failure active (not acknowledged)
On Failure active (acknowledged)
PWR SPLY
FAILURE
Yellow
Failure of the power supply of the control panel
(insuf
fi cient current to power the control panel and/or
to charge the batteries)
Off No failure
Flashing Power supply check active
On Power supply failure active
SYSTEM
FAILURE
Yellow System failure
Off No failure
Flashing System failure active (not acknowledged)
On System failure active (acknowledged)
Battery
Yellow Low battery
Off Battery OK
Flashing Low battery
On Battery failure or missing battery
SIRENS
STOPPED
Yellow General siren stop
Off Sirens not stopped
On Sirens stopped
exclusion
Yellow Exclusion of system devices
Off No device excluded
On At least one device excluded
Siren
fail./EXCL.
Yellow Failure or exclusion of the sirens
Off No siren excluded
Flashing Siren failure active (not acknowledged)
On Siren failure acknowledged or siren excluded
IP/PSTN
fail./EXCL.
Yellow Failure or exclusion of the alarm transmission equipment
Off No ATE excluded
Flashing ATE failure active (not acknowledged)
On ATE failure acknowledged or ATE excluded
zone in test
Yellow Presence of zones under test
Off No zone under test
On At least one zone under test
SYSTEM
MONITORED
Yellow Monitored system mode
Off System not monitored
On System monitored
mains PWR OK
Green Presence of mains power
Off No mains power
On Mains power OK
NETWORKED
DEVICES
Yellow
State of the connections between the devices
connected on the RS485 bus
Off RS485 communication OK
Flashing Communication error active (not acknowledged)
On Communication error active (acknowledged)
TX CARRIED
OUT
Red State of telephone noti fi cations
Off No telephone noti fi cation transmitted
Flashing Telephone noti fi cation transmission active
On Telephone noti fi cation transmitted successfully
N.B. The lighting of each speci fi c failure LED is always accompanied by the lighting of the general failure LED. If the automatic acknowledgment of failures is
disabled, the power supply failure and battery LED remains visible until the alarms are acknowledged. In cases where the control panel is reset or not working,
lighting of the two general failure and system failure LED is accompanied by a beep.