Tecno-gaz TECNOHEART plus, User Manual

Page: 13 / 53

8
Table 1. Parts of the Top and Right Panel
1
Cover
The cover is designed to protect the action icons, patient mode
button and shock button.
2
Status indicator
The status indicator indicates the status of the unit, the
temperature and the battery level.
3
Electrode connector
The electrode connector is used to connect the electrodes.
4
Action Icons
The LED indicator flashes red under the corresponding action
icon.
Once the user has identified the patient based on type, select
5
Patient mode switch
6
Shock Button
patient mode between adult or paediatric patient using the mode
switch.
Once preparation for the electric shock is completed, the current
shock button will flash. Press the current Shock button to deliver
the shock.
7
Scrolling button
The scrolling button opens the cover, to turn on push the
scrolling button to the right.
8
SD card slot
The SD card is required to save data and update AED firmware.
Infra-red
communication port
The infra-red communication port is used to communicate with
the PC.
10 Handle Battery AED Handle and Battery
Parts of the Rear Panel
1
2
1. Handle/Battery
2. Battery
removal button
Figure 3. Parts of the Rear Panel
9