www.tecnaonline.com - [email protected]
E N G L I S H
PAR
DESCRIPTION
2.4
BASIC SAFETY INSTRUCTIONS
8
/44
REV
0.0
SAFETY
2
2.4.1
GENERAL INSTRUCTIONS
•
Comply with the prescribed purity level as per ISO 4406 (c) of the hydraulic pressure medium
•
You can find information regarding the purity level in the support frame operating manual.
•
Take measures to ensure that there are no dangerous situations for persons and property
parameters if the need arises to stop the safety equipment for commissioning or maintenance
work for instance. Follow the above-mentioned support frame operating manual for this.
RISK OF BURNS!
The hydraulic breaker heats up intensely during operation and can get very hot when in operation
and may cause burns.
»
Allow the hydraulic breaker to cool down before you touch it.
»
Protect yourself with heat-resistant protective clothing e.g. gloves.
»
Follow the ISO 13732-1 and EN 982 standards as well.
•
The guarantee is applicable solely for the delivered design.
•
The guarantee expires in case of incorrect mounting.
•
Pay attention to high-voltage lines, underground cables and feed lines so that they are not
damaged during operation. If they are damaged, measures must be taken immediately such that
there is no danger due to it.
•
Do not work with the hydraulic breaker if any persons are present on the hydraulic breaker.
•
Depending on the type of connection, keep in mind the pressure condition when connecting to
the hydraulic system and when separating from the hydraulic system. The hydraulic system must
be operated at zero pressure in case of an emergency.
•
Keep persons and animals away from the sphere of activity of the hydraulic breaker during all the
mounting and maintenance work.
•
Never leave the hydraulic breaker unsupervised during the mounting and maintenance work.
•
The hydraulic breaker may not be operated without the safety equipment and protective caps
attached by TECNA or those installed by customers.
•
The defective components must only be replaced with the original parts having the same
hydraulic and mechanical data, otherwise the safety and functioning cannot be maintained.
•
All the safety equipment, fastenings as well as hydraulic connections and lines must be regularly
checked for flawless condition.
•
In case of injuries, visit a doctor who is knowledgeable about these injuries.
•
Use sufficient respiratory protection in case of lot of dust formation or dust containing asbestos.
DANGER
OPERATING MANUAL
-
H
ydraulic
breakers
T
series
