www.tecnaonline.com - [email protected]
E N G L I S H
PAR
DESCRIPTION
6.6
FITTING AND REMOVING THE PLUG TOOL
1.
Press the locking pin
(1)
in.
2.
Remove the retaining wedge
(3)
.
3.
Press the locking pin
(2)
in.
4.
Remove the retaining wedge
(4)
.
5.
Pull out the plug tool.
CAUTION!
Pay attention to the weight of the plug tool! Transport the plug tool securely and use a lifting
gear if necessary.
6.
Storing the plug tool safely and securing it against shifting.
FIGURE 8: Removing the plug tool
REMOVING THE PLUG TOOL
CAUTION!
Pay attention to the weight of the plug tool! Transport the plug tool securely and use a lifting gear
if necessary.
6.
Insert the retaining wedges
(3)
and
(4)
again till the locking pins
(1)
and
(2)
are released again.
CAUTION
CAUTION
OPERATING MANUAL
-
H
ydraulic
breakers
T
series
21
/44
REV
0.0
MOUNTING THE HYDRAULIC BREAKER
6
