www.tecnaonline.com - [email protected]
E N G L I S H
2
SAFETY
PAR
DESCRIPTION
2.4
BASIC SAFETY INSTRUCTIONS
7
/44
REV
0.0
SAFETY
2
The potential of danger changes due to the interplay of the hydraulic breaker and the support frame
because the hydraulic breaker is mounted on the support frame. This operating manual does not
replace the operating manual of the support frame on which the hydraulic breaker is mounted.
This operating manual must be read and followed.
The safety instructions help to prevent personal injury or damage to property when dealing with
the hydraulic breaker and the environment. All users must read these safety instructions and follow
them at all times.
In addition to the operating manual, the universally valid as well as local regulations regarding accident
control, safety at work and rules for environment protection must be provided and observed.
Follow the instructions about using the hydraulic breaker in the support frame operating manual.
•
Use the hydraulic breaker only if it is in a technically sound condition.
•
Repair the defects in the hydraulic breaker immediately. Inform TECNA immediately in case of
malfunctions. Do not make any modifications or re-constructions in the hydraulic breaker,
otherwise the declaration of conformity becomes invalid and the operating permit is terminated.
•
Check the hydraulic breaker for visible defects such as cracks in the casing, screws, covering
caps or seals.
•
You may not fundamentally modify or re-construct the hydraulic breaker.
•
Use the hydraulic breaker within the range of capacity only, which is specified in the Technical Details.
•
Do not use the hydraulic breaker in explosive environments if there is no explicit permission for it.
•
Close the front panel of the support frame before you start working with the hydraulic breaker.
•
Wear the necessary protective equipment, e.g. protective helmet, ear muffs, protective clothing
among other things as per the requirements.
•
Do not wear loose clothing or jewellery that could get caught in the operating elements or other
parts of the support frame.
•
Persons who are under the influence of alcohol, drugs or medicines may not transport, mount,
commission, operate or repair the hydraulic breaker.
•
Only ask for standard signs and that too from one person only when working on the site.
•
The minimum age limit for the operating personnel is 18 years.
•
Fasten all the loose objects such as tools and remove these objects from catwalks, levels, etc.
•
Ensure that all the safety equipment belonging to the hydraulic breaker is available, installed
properly and is fully functional. You may not change the position of the safety equipment,
handle it or make it ineffective.
•
Ensure that the activated user can be brought into a safe position (e.g. immediate stop) by using
a proper EMERGENCY STOP function.
•
Follow the warning and instruction signs attached to the hydraulic breaker. In addition, ensure
that these signs are not removed and that they are always legible.
2.4.1
GENERAL INSTRUCTIONS
OPERATING MANUAL
-
H
ydraulic
breakers
T
series
