TECNA T aD168 Operating Manual Download Page 42

Page: 42 / 46

www.tecnaonline.com - [email protected]

E N G L I S H

DISPOSAL

PAR

DESCRIPTION

12.1

DISPOSAL

Careless disposal of the hydraulic unit and pressure medium can lead to environmental pollution.

Therefore, you must observe the following points:

•

Dispose of the hydraulic breaker and pressure medium as per the country-specific regulations.

•

The hydraulic breaker does not emit any hazardous substances if it is used as directed. Hence,

there are no negative effects on human beings and the environment under normal circumstances.

•

The hydraulic breaker can be reused mainly with respect to the material because of the high

metal content. An optimum metal recycling can be achieved by dismantling individual assemblies.

/44

REV

0.0

DISPOSAL

OPERATING MANUAL

ydraulic

breakers

series

Summary of Contents for T aD168















































Search results

Summary of Contents for T aD168

Reviews:

Related manuals for T aD168

Brands by name

Popular brands

TECNA T aD168, Operating Manual

Search results

Summary of Contents for T aD168

Reviews:

Related manuals for T aD168

Brands by name

Popular brands