background image

 

 

 

 

 

GENERAL INFORMATION 

 
The symbol "OPEN BOOK" means a recommendation 
to read important things contained in the record. 
 
The symbol "BIN" crossed out, abbreviation WEEE 
(Waste of Electrical and Electronic Equipment) means 
that at the end of life, it should not be discarded with 
household waste, but filed to the sorting of the locality. 
Waste recovery can help preserve our environment. 
 
The symbol "CE" is the guarantee of compliance with 
harmonized European standards, voluntary, reflecting 
the essential requirements into technical 
specifications. These standards are not mandatory 
but are guarantees of compliance with essential 
requirements. 
 
The symbol ROHS (Restriction of use of some 
Hazardous Substances) on the Environmental 
Protection, certifies that for each of the five hazardous 

substances • Lead • Mercury • (hexavalent) chromium • 

products for protection against flames PBB and PBDE, 
the peak concentration is equal to or less than 0.1% of 
the weight of homogeneous material, and 0.01% for the 

6th • cadmium.

 

 
The symbol "DOUBLE SQUARE" means a double 
insulated. A basic insulation and supplementary 
insulation. This device requires no connection to the 
mass of a protective conductor grounded. The 
materials are said : double insulation class II. 
 
 

 

 

Summary of Contents for TAR-3061


















Reviews: