9
Under the
“
operating mode
”
, the machine will enter the auto mode after you
press this button.
Under the
“
standby mode
”
, the machine does not respond after you press
this button
6.
“
Réponse
”
(Response) button
Under the
“
operating mode
”
or
“
standby mode
”
, the machine will beep after
you press this button.
Notes : Assemble two pieces of AAA batteries before use.
If the remote control is not in use for a long time, please take out
its batteries.
PRODUCT OPERATION
1. Charging
After Switching off the power switch of the machine, connect the power
adapter to pawer supply and insert the other end into the charging interface
of the machine. See the diagram below:
A In case of low power, the red light of the
“ ”
button of the machine will
flicker.
B In the charging process, the green light of the
“ ”
button of the machine
will flicker.
C After the product is charged fully, the green light of the
“ ”
button of the
machine will be on constantly.
D When the product is charged for the first time, please ensure charging it
for 6h at least.
E When the product is turned on and charged, if you remove the power
adapter, the
“ ”
button of the machine will flicker in red and green
alternatively to remind you that the power switch is not turned off. If you do
not use the machine, please turn off the power switch.
F Please charge the machine fully after you finish using it every time.
G In order to protect the battery, please charge it every 2 months when the
machine is turn off.
