11
press either
“
Marche/ Pause
”
button of the remote control or the
“
”
button of the machine body.
4. Réponse (ResponSE) function
When the machine is not in the range of visibility or you cannot hear it is
working, after you press the button
“
Réponse
”
on the remote control, the
machine will beep, so that you can find it through the sound.
PRODUCT MAINTENANCE
1. Cleaning of side brushes
If side brushed are dirty, please wash them with clean water and then use
them after they get dry naturally. If they are damaged and cannot work
normally, please change them.
Notes : When changing side brushes, please correspond the sign
‘
L
”
and
“
R
”
on
the side brushed to the position
“
L
”
and
“
R
”
at the bottom of the machine
respectively.
After the machine finishes sweeping, please wash its side brushes to
ensure its operation.
2. See The picture below for cleaning the dust bin and strainer.
A After you press the finger sign of the swivelling cover, the cover will open
automatically.
B After tacking out the dust bin, please check if the suction channel of the
host is obstructed by foreign matters and also clean it up.
C Remove the efficient strainer.
D Remove the preliminary strainer.
E Lower the dust bin until dust is poured out.
F Clean up the dust bin, preliminary strainer and efficient strainer fully. We
suggest cleaning up the efficient strainer once after using it for 15-30 days.
The maximum service life of the efficient strainer is 24 months. The efficient
strainer shall not be cleaned with a brush but shall be blown with a dryer or
knocked slightly by virtue of an external force to make dust fall down. Do not
wash it with water.
G Assemble them correctly. Please ensure that two strainers are assembled
well to avoid damages to the machine.
Notes : Please clean up the dust bin and the suction channel after sweeping
every time.
After its components are washed with water, keep them getting dried
naturally but do not dry them under the sunshine. They shall be put into
the machine for use after they are fully dried to avoid affecting functions
and life of the machine.
