-
OPERATORS MANUAL
Page 2
Table of Contents
:
Number Content
Page
1.
General description ........................................................ 2
2.
Tilting the Front Unit up and down............................... 11
2.1
Mounting spacer blocks .......................................... 11
3.
Media ........................................................................... 12
3.1
Loading Media ....................................................... 12
3.2
Trim Waste Strips .................................................. 13
4.
Operation ..................................................................... 14
4.1
Printer Set Up ....................................................... 14
4.2
Operation Modes ................................................... 14
5.
Job Requirements......................................................... 16
5.1
SPINFLOW ............................................................ 16
5.2
OEM RIP integration............................................... 16
6.
Troubleshooting ........................................................... 16
7.
Specifications ............................................................... 19
7.1
Technical Specifications .......................................... 20
7.2
Safety Specifications .............................................. 20
7.3
EMC Specifications................................................. 21
7.4
EU Declaration of Conformity .................................. 22
1.
General description
Figure 1
SPINJET 6200 is intended for use on the Designjet Z6200 and Z6100
HP large format printer models (referred to as the Printer) only. The
instructions for installation and operation of both Printer and SPINJET
6200 must be followed.
SPINJET 6200 is intended for permanent installation on the above-
mentioned printer models. Normal single-sided printing is possible
without removing or tilting down the SPINJET 6200.
