-
OPERATORS MANUAL
Page 12
3.
Media
3.1 Loading Media
Only use SPINJET approved Media Rolls (see
Section 7.1
Technical Specifications
). Make sure to install the Core Adaptors
(3”) supplied with the Printer as illustrated on
Figure 19
. Adaptors
must be installed in both ends.
Figure 19
Check that the Media Roll has been pressed fully up against the
Roll stopper and no gap between the Media roll and roll stopper is
present as illustrated on
Figure 20
.
Figure 20
Install Core Adaptors
Media Roll
Roll stopper
No Gap
