Techpro TRIDVR-PRE32C Prime Series User Manual Download Page 43

Page: 43 / 187

User Manual of Digital Video Recorder

3.4

Adjusting Live View Settings

Purpose:

Live View settings can be customized according to different needs. You can configure the output interface,

dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.

Steps:

Enter the Live View Settings interface.

Menu> Configuration> Live View

Figure 3. 7

Live View-General

The settings available in this menu include:

•

Video Output Interface:

Designates the output to configure the settings for. Outputs include

HDMI/VGA and CVBS (depends on the model).

•

Live View Mode:

Designates the display mode to be used for Live View.

•

Dwell Time:

The time in seconds to

dwell

between switching of channels when enabling auto-switch

in Live View.

•

Enable Audio Output:

Enables/disables audio output for the selected camera in the live view mode.

•

Event Output:

Designates the output to show event video; if available, you can select a different

video output interface from the Video Output Interface when an event occurs.

•

Full Screen Monitoring Dwell Time:

The time in seconds to show alarm event screen.

Set the camera order.

Select

View

tab.

Figure 3. 8

Live View- Camera Order

Summary of Contents for TRIDVR-PRE32C Prime Series




























































































































































































Search results

Summary of Contents for TRIDVR-PRE32C Prime Series

Reviews:

Related manuals for TRIDVR-PRE32C Prime Series

Brands by name

Popular brands

Techpro TRIDVR-PRE32C Prime Series, User Manual

Search results

Summary of Contents for TRIDVR-PRE32C Prime Series

Reviews:

Related manuals for TRIDVR-PRE32C Prime Series

Brands by name

Popular brands