Techpro TRIDVR-PRE32C Prime Series User Manual Download Page 182

Page: 182 / 187

User Manual of Digital Video Recorder

182

Figure 13. 10

Edit User Interface-operator and guest

Figure 13. 11

Edit User Interface-admin

Edit the parameters.

•

Operator and Guest

You can edit the user information, including user name, password, permission level and MAC address.

Check the checkbox of

Change Password

if you want to change the password, and input the new one in the

text field of

Password

and

Confirm

•

Admin

You are only allowed to edit password and MAC address. Check the checkbox of

Change Password

if you

want to change the password, and the input the correct old password, and the new one in the text field of

Password

and

Confirm

Click the

button to save the settings and exit the interface.

Summary of Contents for TRIDVR-PRE32C Prime Series




























































































































































































Search results

Summary of Contents for TRIDVR-PRE32C Prime Series

Reviews:

Related manuals for TRIDVR-PRE32C Prime Series

Brands by name

Popular brands

Techpro TRIDVR-PRE32C Prime Series, User Manual

Search results

Summary of Contents for TRIDVR-PRE32C Prime Series

Reviews:

Related manuals for TRIDVR-PRE32C Prime Series

Brands by name

Popular brands