Technomate TM-500 User Manual Download

Page: 49 / 66

3. Operation & Setting

TUXTEXT CONFIGURATIONS MENU

Press the [MENU] button whilst in the Teletext menu to enter the TuxText

configuration menu.

(1) Teletext Selection:

Use the [LEFT/RIGHT] Navigation buttons to choose another Teletext

provider from the current channel/service and press the [OK] button to view.

Screen Format:
(2) Standard mode 16:9

Press the [OK] button to turn ON the TuxText (Teletext) in 16:9 Aspect

Ratio. Default is OFF.

(3) Text/TV mode 16:9

Press the [OK] button to turn ON the TuxText (Teletext) in 16:9 Aspect

Ratio if the PIG-Mode is activated by the [VOLUME UP/DOWN] button.

Default is OFF.

(4) Brightness

Use the [LEFT/RIGHT] Navigation buttons to increase/decrease the

Brightness.

(5) Transparency

Use the [LEFT/RIGHT] Navigation buttons to increase/decrease the

Transparency.

(6) National Characterset

This is used to display the Teletext pages with the correct

characters/letters of your location. Press the [OK] button to turn ON/OFF.

Default is ON (enabled). If OFF (disabled), use the [LEFT/RIGHT]

Navigation-Buttons to choose your Characterset.

PARENTAL LOCK

Press the [MENU] button to go to the Main Menu. Go to - (6)

Setup

(4)

Parental Lock

Parental lock

: To lock (password protect) channels/services of your

choice (in the Service list).

Setup lock

: To lock (password protect) the Menu (6)

Setup

The Parental setup requires a four digit code of your choice (PIN) for

Parental lock

and

Setup lock

To enable Parental lock, go to

Parental lock

and press the [OK] button

(A check/tick will appear in the checkbox). Then go to

change PIN

and press

[OK] button and enter a PIN of your choice. Re-enter the PIN to confirm.

If you do not want to view locked channels/services in the

Service List

, press

[OK] button on

Hide locked services

To disable Parental lock, press [OK] button on

Parental lock

and enter the PIN

to verify.

Press [

GREEN

] or [OK] button to save.

The same method applies for

Setup lock

Once you have set up

Parental lock

, you can lock/unlock any

channel/service in the

Service List

. Go to Service List and press the [MENU]

button to enter the

Service Menu

. There is now a new

lock

option.

Summary of Contents for TM-500



































































Search results

Summary of Contents for TM-500

Reviews:

Related manuals for TM-500

Brands by name

Popular brands

Technomate TM-500, User Manual

Search results

Summary of Contents for TM-500

Reviews:

Related manuals for TM-500

Brands by name

Popular brands