background image

14

13

2. Control and Function

PROV

Opens Provider list.

AUDIO

Shows the available Audio Tracks (Audio Languages).

Fav.

Opens Favorite list.

EPG

Press the [EPG] button once to show the 

EPG info

. Press it twice to enter the

EPG Style

menu. Press the [OK] button to view further information.  

INFO

Shows current program's stream information

MENU

Press the [MENU] button on the remote to open the Main Menu.

Use the [LEFT/RIGHT] Navigation buttons on the remote or press the 
shortcut number of the Menus on the Numeric keypad to select a menu.

* Choose from the following:

(1) TV Mode
(2) Radio Mode
(3) File Mode
(4) Information
(5) Reboot
(6) Setup
(7) Games
(8) Timer

EXIT

Return to the previous menu or abort/exit operations.

VOL + / -

Increase/Decrease the Volume (volume up/down).

SAT

Opens 

Satellite Configuration

menu.

13

14

15

16

17

18

19

20

21

22

23

FILELIST

Opens 

File mode

OK

Press the [OK] button to open the Service List in viewing mode and File 
List in File mode.
Press [OK] to confirm a selection/function or to enter a chosen OSD Menu.

NAVIGATION BUTTONS

Move in menus. In viewing mode, you can open the Service List by
pressing the [UP/DOWN] button. To skip a page in the Service List, use the
[LEFT/RIGHT] buttons.

SEEK RW (

)

Press the [SEEK RW] button to jump the index backward to a bookmark
(chapter)

SEEK FF (

)

Press the [SEEK FF] button to jump the index forward to a bookmark
(chapter).

BOOKMARK (

)

Produces a bookmark (chapter) whilst watching a recorded program.

PVR FUNCTION

Control the PVR functions in PVR Mode

COLOR BUTTONS

Activates certain menu functions. Usage instructions are shown in each
OSD menu.

NUMERIC KEY (0-9)

Control the numerical operation and change the Channel/Service number
directly.

PREV (<)

Return to the previous channel/service or move to the 

end

of the 

Service List

or the 

Play List

NEXT (>)

Go to the next channel/service or move to the beginning of the 

Service List

or the 

Play List

24

25

26

27

28

29

30

31

32

Summary of Contents for TM-500



































































Reviews: