Technomate TM-500 User Manual Download

Page: 12 / 66

2. Control and Function

2.3 REMOTE CONTROL UNIT

POWER

Turns the

TM-500/600

ON/StandBy (Power OFF in viewing mode only).

If you hold (press) the button for more than 3 seconds, the

Reboot/Sleep

Timer

menu will appear.

Refer to "

3.3 Menus

(5)

Reboot

" instructions for further information.

MUTE

Turn the sound OFF/ON.

LAN

Opens

Communication Setup

menu.

TV/AV

Switch between Terrestrial and Satellite channels.

EDIT

Opens

Channel list edit

menu.

UHF

Opens

UHF modulator setup

TV/RADIO

Opens TV or Radio channels.

PVR

Activates PVR mode. By pressing this button twice, if the

Service List

opened, it will change the layout/view of the

Service List

PLAYLIST

Opens Playlist menu where showing zapping history.

USB

Opens

USB setup

SUB.T.

Shows subtitle or caption (if the broadcaster transmits it).

T.Text

Opens Teletext.

Note

The Remote Control Unit’s design may be changed without any prior notice.

Summary of Contents for TM-500



































































Search results

Summary of Contents for TM-500

Reviews:

Related manuals for TM-500

Brands by name

Popular brands

Technomate TM-500, User Manual

Search results

Summary of Contents for TM-500

Reviews:

Related manuals for TM-500

Brands by name

Popular brands