Technomate TM-500 User Manual Download

Page: 37 / 66

3. Operation & Setting

SATELLITE INSTALLATION & TP EDIT

SATELLITE CONFIGURATION

To set up your satellite configuration, refer to “

3.1 Getting started

”.

SATFIND

Press the [MENU] button to go to the

Main Menu

. Go to - (6)

Setup

(2)

Satellite Installation & TP Edit

(2)

Satfind.

This menu allows you to clear see the SNR, AGC and BER. Choose a satellite

and transponder from the dropdown list.

Adjust the dish towards the desired satellite until you have a high value on the

Signal strength AGC and on the Signal quality SNR indicator.

BER should always indicate a value of zero if the Satellite is locked and

synced.

SNR

: Signal to Noise Ratio. This Indicator shows the Signal Strength.

AGC

: Automatic Gain Control. This Indicator shows the Signal Quality.

BER

: Bit Error Rate. This Indicator shows the Signal Errors Rate.

AUTOMATIC SATELLITE SEARCH

Go to Automatic MultiSat Search (press the [MENU] button to go to the

Main Menu). Go to - (6)

Setup

(2)

Satellite Installation & TP Edit

(5)

Automatic Satellite Search

and select the satellite that you want to

scan from the dropdown list. Press the [

GREEN

] button to scan.

AUTOMATIC MULTISAT SEARCH

To scan more than one satellite all at once, go to Automatic Multisat Search

(press the [MENU] button to go to the Main Menu. Go to - (6)

Setup

(2)

Satellite Installation & TP Edit

(6)

Automatic Multisat Search

Summary of Contents for TM-500



































































Search results

Summary of Contents for TM-500

Reviews:

Related manuals for TM-500

Brands by name

Popular brands

Technomate TM-500, User Manual

Search results

Summary of Contents for TM-500

Reviews:

Related manuals for TM-500

Brands by name

Popular brands