Technomark M4 inline Software User'S Manual Download Page 39

Page: 39 / 47

Page

sur

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

www.technomark-marking.com

Modèle du 29/10/2015

TECHNOMARK

3 Allée Michaël FARADAY

Parc d’activités STELYTEC

42400 SAINT-CHAMOND (France)

Tel : +33 (0) 4 77 22 25 91

Fax : + 33 (0) 4 77 22 38 93

E-mail : [email protected]

The browsing in this window is made by the up and down arrows.



Language

: marking machine language can be modified by using the left and right arrows.



Units

: marking machine units scan be modified by using the left and right arrows.



Autosave

: current marking file autosave (if the machine turns off) can be enabled or disabled by using the

left and right arrows.

Production

mode, the marking files are automatically saved in the case of a loading file.



Brightness

: the screen brightness can be modified by using the left and right arrows.



Sleep mode

: marking machine sleep mode (energy saving) can be modified by using the left and right arrows.

None

: no sleep mode

Medium

: after 5 minutes of inactivity, the screen turns off.

High

: after 5 minutes of inactivity, the machine goes into deep sleep with the lowest consumption

mode (a few milliamp, even relays are turned off). The machine wakes up from any outside event
(keyboard, USB flash drive).

Use the button

to confirm your modifications or

to cancel them.

8.2.

Date

and

time

The function date and time allows setting the date and the time of the controller, also time zone and team rotations
with the following window:

Illustration 25 : Date and time window

Summary of Contents for M4 inline
















































Search results

Summary of Contents for M4 inline

Reviews:

Related manuals for M4 inline

Brands by name

Popular brands

Technomark M4 inline, Software User'S Manual

Search results

Summary of Contents for M4 inline

Reviews:

Related manuals for M4 inline

Brands by name

Popular brands