Page
12
sur
47
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
Modèle du 29/10/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : [email protected]
In this example the same text (ABCDEF) is done with a positive diameter value (to the left) and with the same
value but negative (to the right).
By default, the machine sets the beginning point to 0 (parallel to the X axis). To modify the beginning point,
you only have to modify the value of the line angle.
Give the text compression from 50% to 150%
Compression is used to deform characters and to modify the width, without changing the height.
Normal compression compression of 50%
Gives spacing between characters from 0 to 9
A standard text has a spacing value of 5. This value can vary from 0 to 9, below 5 the text is narrowed and
above 5 the text is widened
Spacing of 0
Spacing of 9
Gives italic inclination of the text from 0 to 9
A straight text has an italic value of 5. This value can vary from 0 to 9, below 5 the text leans to the left and
above 5 the text leans to the right.
Italic of 0
Italic of 9
Gives the number of impact for each marking point, from 1 to 9
The combination shift+delete allow deleting a marking line.
The toolbar is adjusted with the current selection of the cell, especially in the text column where you can select a
function to change it:
In this example, pressing the key
allows to modify the serial number Num1.
