BIOS SETUP
TL-SBC 8280 User’s Manual
35
Time
The time format is:
Hour : 00 to 23
Minute : 00 to 59
Second : 00 to 59
To set the time, highlight the “Time” field and use the <PgUp>/
<PgDn> or +/- keys to set the current time.
IDE Primary HDDs / IDE Secondary HDDs
The onboard PCI IDE connectors provide Primary and Secondary
channels for connecting up to four IDE hard disks or other IDE devices.
Each channel can support up to two hard disks; the first is the “Master”
and the second is the “Slave”.
Press <Enter> to configure the hard disk. The selections include Auto,
Manual, and None. Select ‘Manual’ to define the drive information
manually. You will be asked to enter the following items.
CYLS :
Number of cylinders
HEAD :
Number of read/write heads
PRECOMP :
Write precompensation
LANDZ :
Landing zone
SECTOR :
Number of sectors
The Access Mode selections are as follows:
Auto
Normal (HD < 528MB)
Large
(for MS-DOS only)
LBA
(HD > 528MB and
supports Logical Block
Addressing)
Drive A / Drive B
These fields identify the types of floppy disk drive A or drive B that has
been installed in the computer. The available specifications are:
360KB
5.25 in.
1.2MB
5.25 in.
720KB
3.5 in.
1.44MB
3.5 in.
2.88MB
3.5 in.
Summary of Contents for TL-SBC 8280
Page 4: ...iv TL SBC 8280 User s Manual This page is intentionally left blank ...
Page 8: ...INTRODUCTION 4 TL SBC 8280 User s Manual Board Dimensions ...
Page 14: ...INSTALLATIONS 10 TL SBC 8280 User s Manual Jumper Locations on TL SBC 8280 ...
Page 34: ...INSTALLATIONS 30 TL SBC 8280 User s Manual This page was intentionally left blank ...