BIOS SETUP
44
TL-SBC 8280 User’s Manual
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are
Auto
and
Disabled
.
USB 2.0 Controller
The options for this field are
Enabled
and
Disabled
. By default, this
field is set to
Disabled
. In order to use USB 2.0, necessary OS drivers
must be installed first.
USB Controller
The options for this field are
Enabled
and
Disabled
. By default, this
field is set to
Enabled
.
USB Keyboard Support
The options for this field are
Enabled
and
Disabled
. By default, this
field is set to
Disabled
.
AC97 Audio
The default setting of the AC97 Audio is
Auto
.
Init Display First
This field allows the system to initialize first the VGA card on chip or
the display on the PCI Slot. By default, the
PCI Slot
VGA is initialized
first.
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.
Onboard FDC Controller
Select
Enabled
if your system has a floppy disk controller (FDC)
installed on the CPU card and you wish to use it. If you install an add-in
FDC or the system has no floppy drive, select Disabled in this field.
This option allows you to select the onboard FDD port.
Summary of Contents for TL-SBC 8280
Page 4: ...iv TL SBC 8280 User s Manual This page is intentionally left blank ...
Page 8: ...INTRODUCTION 4 TL SBC 8280 User s Manual Board Dimensions ...
Page 14: ...INSTALLATIONS 10 TL SBC 8280 User s Manual Jumper Locations on TL SBC 8280 ...
Page 34: ...INSTALLATIONS 30 TL SBC 8280 User s Manual This page was intentionally left blank ...