RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
Press
ENTER
again to reset all parameters to their default values, or return to the upper menu level
by pressing
CLEAR
for a few seconds.
This function does not alter the language setting.
9.3.6. L
OW KIT MENU
This function directly accesses the firmware of the brake board. To access this menu, when the
LED display shows:
LOW KIT MENU
press
ENTER
. This function is structured as follows:
LOW KIT MENU
Low Kit Version
Low Kit fault code
9.3.6.1. Low kit version
This function displays the brake board firmware version. To access this menu, when the LED
display shows:
LOW KIT VERSION
press
ENTER
, the following message appears:
H:x L:x B:x
Which identifies the firmware version.
9.3.6.2. Low Kit fault code
This function displays the error code that is blocking the low kit. To access this menu, when the
LED display shows:
LOW KIT FAULT CODE
press
ENTER
, the following message appears:
FAULT=XX
In case of FAULT=00, the board is not in an error condition.
Page 9.19
