RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
Page 7.24
7.10. DISASSEMBLING THE PULLEY
Figure 7.10-1
Carry out the operations described in paragraphs
7.7. “Disassembling the guards” and 7.9.
“Disassembling the belt”.
1. On the left side of the machine, remove the
plastic cover
a
.
Figure 7.10-2
2. Remove the snap ring
b
.
Be careful with the various spacer rings
on the pulley shaft.
Figure 7.10-3
3. Remove the pulley
c
from the opposite side
of the machine.
4. Back off the 3 screws
d
using a medium
Phillips screwdriver.
5. Remove the plastic cover, not visible in the
photo, from the pulley
c
.
To reassemble the pulley, carry out the above
steps in reverse order.