RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
9.1.5. P
AUSE TIME
It is possible to set a maximum pause time for each exercise in seconds, with values ranging from
10 to 999. To change the setting, when the LED matrix shows the current maximum time:
PAUSE TIME : xxx
Press the
ENTER
key to modify the value: when the current parameter value starts to blink, press
the
CLEAR
key to erase the current value and then use the number keys to enter the desired new
value.
Press
ENTER
to confirm the operation, use the
+
or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 60.
9.1.6. E
NABLE
TGS
It is possible to enable or disable the use of the TGS reader. To change the selection, when the LED
matrix shows the current setting:
TGS : xxx
Press the
+/- GOAL
keys to select the desired option out of those listed in the table below:
TGS
ENABLED
<default>
DISABLED
Press
ENTER
to confirm the operation, use the
+
or – effort level keys to move to the next or
preceding parameter.
9.1.7. E
NABLE KEYBOARD
It is possible to disable the keyboard so that the machine can only be used with the TGS. To change
the selection, when the LED matrix shows the current setting:
KEYS : xxx
Press the
+/- GOAL
keys to select the desired option out of those listed in the table below:
K
EYS
ENABLED
<default>
DISABLED
Press
ENTER
to confirm the operation, use the
+
or – effort level keys to move to the next or
preceding parameter.
Page 9.3
