RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
Page 7.28
7.13. DISASSEMBLING THE SPEED SENSOR
Figure 7.13-1
Carry out the operations described in paragraph
7.7. “Disassembling the guards”.
1. Back off the 2 screws
a
using a small Phillips
screwdriver.
2. Remove the speed sensor.
3. If it proves difficult to back off the screws
a
in their current position, back off the screws
b
using a 3-mm Allen wrench and remove
the sensor together with the support.
If the plastic sensor support is also
removed, adjust the sensor position as
described in paragraph 8.2. “Speed
sensor position”.
To reassemble the speed sensor, carry out the
above steps in reverse order.
