Technogym New Bike EXCITE Plus, Technical Service Manual

Page: 206 / 237

- New Bike: Technical service guide - rev. 4.1
Page 9.12
9.2.12. E
NABLING THE MULTI
-
LANGUAGE MODE
It is possible to set the equipment so as to be able to select the language at each training session. In
order to change the setting, when the display shows the current setting:
LANGUAGE: xxx
press the +/- GOAL keys to choose the desired setting from among the options shown in the
following table:
L
ANGUAGE
FIXED <default>
MODIFIABLE
9.2.13. S
ETTING THE PARAMETERS TO DEFAULT VALUES
It is possible to set the default values of the user menu. In order to select the function, when the
display shows:
DEFAULT CONFIG.
Press ENTER to confirm the choice, + or - of the difficulty level to move onto the subsequent or
previous parameter. If ENTER has been pressed, the display shows:
CONFIRM?
confirm with ENTER or cancel by pressing CANCEL for a few seconds.
9.2.14. F
ORMATTING THE
P&P
KEY
This function allows the formatting of a TGS key for the Plug-&-Play mode. In order to select the
function, when the display shows:
FORMATTING P&P
confirm with ENTER or cancel by pressing CANCEL for a few seconds.
At the end of the configuration procedure press the CANCEL key for a few seconds to quit.
The CANCEL key can be pressed at any time to interrupt the procedure and return to Stand-By.
9.2.15. SN
This parameter allows the equipment serial number to be displayed.
Press
+ or - of the difficulty level to move onto the subsequent parameter or the previous one.
SN:xxxx