Technogym New Bike EXCITE Plus, Technical Service Manual

Page: 204 / 237

- New Bike: Technical service guide - rev. 4.1
Page 9.10
9.2.5. C
OOLDOWN TIME
It is possible to set the Time of the Cooldown at the end of every exercise in seconds, with values
ranging from 5 to 180. In order to change the setting, when the display shows:
COOLDOWN TIME: xxx
To change the parameter you need to press the ENTER key: the current value of the parameter will
be displayed in flashing mode and it is necessary to press CANCEL to cancel the current value and
use the numerical keys to enter the desired value.
The default value of this parameter is 60.
When training with the TGS key, the cool-down is interrupted when you pull out the key.
9.2.6. E
NABLING THE
TGS
It is possible to enable or disable the use of the TGS reader. In order to change the setting, when the
display shows the current setting:
TGS : xxx
Press the +/- GOAL keys to choose the desired setting from among the options shown in the
following table:
TGS
ENABLED <default>
DISABLED
9.2.7. A
CTIVATING THE
K
EYBOARD
It is possible to disable the use of the function keys so as to allow the equipment to be used only
with the TGS. In order to change the setting, when the display shows the current setting:
KEYS : xxx
press the +/- GOAL keys to choose the desired setting from among the options shown in the
following table:
K
EYS
ENABLED <default>
DISABLED