Technogym New Bike EXCITE Plus, Technical Service Manual

Page: 181 / 237

- New Bike: Technical service guide - rev. 4.1
Page 7.59
7.17. DISMANTLING THE STATOR
Only for 500SP and 700SP versions.
Figure 7.17-1
Carry out the operations in the paragraph: 7.1.
“IMPORTANT NOTE ON DISMANTLING”,
7.9. “Dismantling the guard” and 7.16.
"Dismantling the brake and the Flywheel Unit"
as far as point (3).
1.
Unscrew the flywheel unit from the central
shaft, using a 6mm Allen wrench, while
blocking it on the opposite side using a
10mm Allen wrench.
Figure 7.17-2
2. Remove the small pulley (a).
3. Remove the Flywheel Unit.
Figure 7.17-3
4. Unscrew the 3 screws (b) using a 4mm Allen
wrench.
5.
Slide the cable off with care, as indicated by
the yellow arrow.
6.
Remove the stator (c).
WARNING: The screws (b) must be
tightened using a torque wrench set at
22Nm.
To re-fit the Stator, follow the above operations
in reverse.