Technogym BIKE XT, Service Maintenance Manual

Page: 59 / 68

BIKE XT: Service & Maintenance manual - rev. 2.0
Page 10.1
10. SCHEDULED MAINTENANCE
To keep the machine in perfect working order, carry out the scheduled maintenance operations
specified in the table below:
CLEANING TENSION
CHECK
WEAR
CHECK
PLAY
CHECK
LUBRI-
CATION
MACHINE
EXTERIOR
weekly
(A)
MACHINE
INTERIOR
monthly
(B)
BELT twice-yearly
(C)
yearly
(D)
CHAIN twice-yearly
(E)
yearly
(F)
twice-yearly
(G)
SADDLE
STEM twice-yearly
(H)
These operations must be carried out with the machine turned off and the mains lead
unplugged from the wall output.
The scheduled maintenance operations are described below:
(A) EXTERNAL CLEANING
Carry out every week. For this operation, use only a mild detergent. Be careful never to spray
the product directly onto the machine: use it to moisten a cloth.
(B) INTERNAL CLEANING
Carry out every month. Open the side casings (see paragraph 7.7. ) and use a vacuum cleaner
or compressed air to thoroughly clean the interior, taking special care near the alternator and
the electronic circuit boards.
(C) BELT TENSION CHECK
Carry out every 6 months. Open the side casings (see paragraph 7.7. ) and check the belt
tension. If necessary, adjust the tension as described in paragraph 8.2. .
(D) BELT WEAR CHECK
Carry out once a year. Open the chain (see paragraph 7.7. ) and inspect the belt surface over its
entire length, paying particular attention to the edges and the inner part. If it appears worn out
or frayed, replace the belt (see paragraph 7.10. ).
(E) CHAIN TENSION CHECK
Carry out every 6 months. Open the chain (see paragraph 7.7. ) and check the belt tension as
described in paragraph 8.4. .