background image

Contents

Chapter

Topic  . . . . . . . . . . . . . . . . . . . . . . . . . . .Page

1

Safety notes  . . . . . . . . . . . . . . . . . . . . . . . . .2

2

General  . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

3

Connections  . . . . . . . . . . . . . . . . . . . . . . . . .4

4

Setting up the units  . . . . . . . . . . . . . . . . . . .6

5

Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . .6

6

Trouble-shooting guide  . . . . . . . . . . . . . . . .8

7

Technical data  . . . . . . . . . . . . . . . . . . . . . . .8

European regulations

TechniSat hereby declares that the product  SkyFunk 4 com-
plies with the basic requirements as well as the other rele-
vant regulations set out in
Guideline 999/5/EG.

According to this guideline, the product may be used in the
following countries.

The complete declaration of conformity may be downloaded
from the Internet at the following address:

http://www.technisat.de/konformitaet/skyfunk4.pdf

1 Safety notes

For your own protection, you should read the safety notes
carefully before operating your new equipment.
The manufacturer accepts no responsibility for damage cau-
sed by inappropriate handling, or by ignoring the safety
notes/precautions.
>

Do not open the product case - ever! You are in dan-
ger of receiving an electrical shock. Any intervention
necessary should be carried out only by trained spe-
cialist personnel. 

In the following cases, you should disconnect the
units from the power supply, and call a qualified
repair technician:

>

the power cable or mains adapter are damaged 

>

the unit was subject to high humidity, or liquid has run
into the unit 

>

in case of significant malfunction 

>

in case of severe external damage. 

2

D

A

Summary of Contents for SkyFunk 4









Reviews: