![background image](http://html1.mh-extra.com/html/technisat/skyfunk-4/skyfunk-4_operating-manual_1069509007.webp)
5.1 Setting the transmission and reception
channel for audio and video signals
(AV channel)
To change the transmission or reception channel, set the
desired channel on both units (transmitter and receiver). The
switches used to select the channel are located on the under-
side of the units. In order, for instance, to select Channel 2,
use a pointed object (e.g. ball-point pen, small screwdriver,
etc.) to set switch 2 to „On“ as per the illustration shown
here. The other switches should remain in the „Off“ position.
To select a different transmission channel, please proceed
accordingly.
Please ensure that both the transmitter and the
receiver are set to the same channel.
5.2 Setting the transmission and reception
channel for the infra-red signals (IR chan-
nel)
The switches used to set the
IR channel
are located on the
underside
of the units. In order, for instance, to set Chan-
nel 1, use a pointed object (e.g. ball-point pen, small scr-
ewdriver, etc.), set switch 1 to „On“ as per the illustration
shown here. The other switches should remain in the „Off“
position. To select a different transmisison channel, please
proceed accordingly.
Please ensure that both transmitter and receiver
are set to the same switch position.
7
IR channel setting
AV channel
setting
ON
1 2 3 4
Off
On
ON
1 2 3 4
Off
On