>
Connect the cinch connector of the Scart-cinch adap-
ter cable supplied marked
Receiver
with the Sky-
Funk 4
receiver
.
Please ensure that jacks and sockets of the same
colour are connected with each other.
>
The SkyFunk receiver should be positioned so that
the red IR sensor has a direct line of sight to the
remote control. This is essential to ensure the remote
control signals will be transmitted correctly.
>
When you have completed establishing the above-
mentioned connections, connect the mains adapter
unit supplied with the
DC
input socket of the SkyFunk
4
receiver
.
>
Connect the Scart connector of the adapter cable
marked
receiver
with the Scart socket of your televi-
sion set. You can now view the signals of the SkyFunk
4 receiver on your AV programme slot.
4 Setting up the units
4.1 General
Please note the following when setting up the units:
>
It is usually best to place the units 1-2 m above floor
level.
>
To avoid the units being damaged when falling to the
ground, ensure the units are placed on an even hori-
zontal surface.
>
Try to avoid placing any other electrical appliances,
which may affect the signal, between the transmitter
and the receiver units.
5
Connecting the SkyFunk receiver
Adapter cable (receiver)
TV set
Mains adapter
Receiver