TechniSat MultyMedia TS 1 Operating Manual Download Page 82

Page: 82 / 91

13 Annexure

Problem

Possible cause

Solution

Time not displayed while in stand-by
mode

Time not acquired

Switch to major programme e.g.
ZDF for approx. 30 seconds
Switch on stand-by clock
(Point 6.2.4)

No reception when using an active
antenna

Antenna feed (5V) not switched on

Switch on antenna feed (Point 6.5)

Receiver cannot be switched on
resp. cannot be operated

Receiver blocked

Perform Flash-Reset: Note! All per-
sonal settings will be lost.
>

Disconnect mains power.

Simultaneously press pro-

gramme up and programme down
key

on the receiver panel

, and

keep pressed down.
>

while programme up and pro-
gramem down keys are pres-
sed down, reconnect mains
power.

Keep keys pressed approx. 5
secs. until display * “FLAS”
appears.

BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 82

Summary of Contents for MultyMedia TS 1




























































































Search results

Summary of Contents for MultyMedia TS 1

Reviews:

Brands by name

Popular brands

TechniSat MultyMedia TS 1, Operating Manual

Search results

Summary of Contents for MultyMedia TS 1

Reviews:

Brands by name

Popular brands