Test Transponder
The following points of this menu need only be entered if you
wish to check a satellite signal of a specific satellite.
Transponder frequency
>
In this line, use the
numeric keys
to enter a
frequency on which digital programmes are broadcast.
Polarisation
>
Use the
arrow keys up/down
to enter the desired
polarisation plane (
horiz
ontal or
vert
ical).
Symbol rate
The symbol rate indicates the volume of data broadcast per
second. This could typically be 27500 (27500 symbols per
second).
>
Use the
numeric keys
to enter the correct symbol
rate.
User LNB
If you have entered
User LNB
under the heading DiSEqC
type, you can make further settings:
LOF low
band
LOF (Local oscillator frequency) is the frequency at which an
LNB converts the frequency received into the so-called 1.
intermediate frequency, which can then be received by the
digital receiver. So-called Universal LNBs work with 2 LOFs,
in order to convert the full frequency range of 10.7 to 11,8
GHz (low-band) and 11,7 to 12,75 GHz (high-band).
>
In this line use the
numeric keys
to enter the LOF
of the low band of your LNB.
LOF high
band
>
In this line use the
numeric keys
to enter the LOF
of the high band of your LNB.
LOF trans
ition
>
In this line use the
numeric keys
to enter the
frequency at which your LNB switches from the low
band to the high band.
24
BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 24
Summary of Contents for MultyMedia TS 1
Page 81: ...81 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 81 ...
Page 88: ...Notes 88 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 88 ...
Page 89: ...Notes 89 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 89 ...
Page 91: ...91 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 91 ...
