TechniSat MultyMedia TS 1, Operating Manual, Page: 19 / 91

> If you wish to change the remote control from one
receiver to the other while in operation, again press
the
SAT1 rssp. the SAT2 key and the OK key simul-
taneously,
6.2.4 Stand-by clock
In this line you can decide whether the current time is to be
shown in the display while the receiver is in stand-by mode.
> In this line, use the arrow keys left/right to set
the mode of the stand-by clock to on or off .
Accept settings
To accept and store the settings made in this menu, proceed
as follows:
> Press the green function key Accept . The changes
made will be saved, and you will be returned to the
menu
Settings .
alternatively:
> Press the red function key Back .
A query message will now be displayed (Fig. 6-4) .
> Use the arrow keys left/right to mark the field
Yes , if you wish to accept the changes made, and
confirm by pressing OK .
You will now return to the previous menu.
> Press the TV/Radio key to return to normal opera-
ting mode. The settings will not be saved.
6.3 Audio/Video settings
To optimise the digital receiver for use with your television
set, you can make further settings in the menu
Audio/Video settings .
> Press the Menu key to call up the Main menu .
> Use the arrow keys up/down to mark the line
Settings .
> Confirm by pressing OK .
The sub-menu Settings will be displayed.
(Fig. 6-5)
> Now use the arrow keys up/down to mark the line
Audio/Video settings.
> Confirm by pressing OK .
The menu Audio/Video settings will be displayed.
(Fig. 6-6)
> Use the arrow keys up/down to move the marker
within the menu, and to change the individual settings
as indicated.
19
(Fig. 6-4)
(Fig. 6-5)
(Fig. 6-6)
BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 19