TechniSat MultyMedia TS 1, Operating Manual

Page: 38 / 91

Deleting the SFI timer event
> If you would like to delete a timer event programmed
by means of the SFI, proceed as described above for
marking the appropriate programme.
> Press the red function key Timer to open a selection
window.
> Use the arrow keys up/down to mark the line
Delete timer.
> Confirm by pressing OK .
> To break off an active timer, use the On/Standby key
to swith the digital receiver off.
> After that, press the same key again to switch the
receiver on, and use all the functions again.
7.15.7.3 SFI programme overview
You can use the SFI programme overview to display a table
with the whole day’s programme of a single channel. To do
this, proceed as follows:
> Press the SFI key. The SFI table „ Now “ will be
displayed.
> Press the blue function key SFI Menu to open a
selection window.
> In the selection window, use the arrow keys
up/down to mark the line Programmes .
> Confirm by pressing OK .
The day’s overview of the selected channel will now
be displayed.
(Fig. 7-20)
> You can use the arrow keys to move the marker to
the desired programme or time.
The individual days of the week are displayed along
the lower edge of the screen.
If information is available for the following days, the
appropriate fields will be marked.
> To display the programme content of a specific day,
press the corresponding
numeric key .
Display SFI overview of other programmes
> Press the green function key Programmes . A list of
SFI programmes will be displayed.
> You can now proceed to mark the desired channel
using the
arrow keys . (Fig. 7-21)
> Press the OK key to display the SFI overview of the
marked channel.
38
(Fig. 7-20)
(Fig. 7-21)
BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 38