TechniSat MultyMedia TS 1, Operating Manual

Page: 43 / 91

such as ZDF, etc. for approx. 30 seconds, to acquire the
time.
If it was activated under Point 6.2.4, the time should now be
shown in the display in stand-by mode.
8 Changing the basic programming
8.1 Configuring the Favourites list
This chapter describes how you may change the pre-pro-
gramming of your digital receiver as well as the Favourites
programme list in accordance with your preferences. This
function is also required to sort new programmes into the list
after a programme scan.
To work with this function, you should know the following:
your receiver features two programme lists, the
Favourites
list and the Total list . The Favourites programme list inclu-
des all the programmes you have added as described below.
The Total list includes all programmes/channels.
This chapter also describes how you can delete programmes,
how you can block access to them by means of the parental
control function, or how you can add them to the EPG. If you
press the
OK key to display a programme list, the Favourites
programme list will be displayed.
8.1.1 Calling up the programme list manager
To effect changes in the Favourites list, proceed as follows:
> Press the Menu key to call up the Main menu .
(Fig. 8-1)
> Use the arrow keys up/down to mark the line
Manage TV lists to work on the TV list or
Manage radio lists to work on the radio list.
> Confirm by pressing OK .
The programme list manager for the respective
Favourites list (TV or radio list) will be displayed.
(Fig. 8-2)
The Favourites list will be shown on the right half of
the screen. This is now active, as the currently selec-
ted programme is marked. On the left half of the
screen you will see the alphabetically sorted Total list.
This Total list includes all available programmes.
43
(Fig. 8-2)
(Fig. 8-1)
BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 43