![background image](http://html1.mh-extra.com/html/technisat/digit-isio-s2/digit-isio-s2_quick-start-manual_1069673031.webp)
31
The progress bars are coloured yellow according to the amount of transmission time
already expired for the current programme. If the beginning of the progress bar is
coloured red the transmission started too early, and if the end of the progress bar is
coloured red the current programme has overrun.
Additional programme properties are also displayed:
For example:
¡
¢
K-BDA_Digit ISIO S2(DVB30)_RC3.qxd 13.05.2014 11:20 Seite 31
for teletext
for 16:9 broadcasts
for encrypted channels
for Dolby Digital broadcasts
for subtitles
for HbbTV
The current time is shown in the right-hand upper corner of the screen.
7.4 Receiving encrypted channels
>
Insert the NAGRAVISION/CONAX smartcard into the card slot in the integrated card
reader. (gold-coloured chip facing down, and in the direction of insertion)
or
>
Insert a CI/CI+ module into the slot.
>
Insert the smartcard into the CI/CI+ module card slot. Ensure that the gold-coloured
chip on the smartcard is facing upwards, in the direction in which the card is inserted.
Note section 8.5 in the instruction manual as well when doing so.
7.5 Volume control
You have the option of adjusting the volume on your digital receiver. This facilitates
operation of the receiver, as it means you can access all the major functions on a single
remote control, and will only rarely have to resort to using the remote control for the TV.
>
To adjust the volume of your TV, press
to increase the volume, and
Volume -
to decrease it.
7.5.1 Using mute
>
To switch the sound off (mute), press the
Sound on/off
button - press the key again
to switch the sound back on.
Throughout the time that the volume is switched to mute, the
¡
¢
K-BDA_Digit ISIO S2(DVB30)_RC3.qxd 13.05.2014 11:20 Seite 31
symbol appears at
the upper right of the screen.
7.5.2 Selecting a different language/Sound option
>
Using the
Options selection
feature you can select the language/sound option you
want via the
Sound
option.
When doing so please also note section 8.7 in the instruction manual.