TechniSat 100Hz Television sets Colani-TV Classic Line, Instruction Manual

Page: 18 / 32

Settings
17
➜
Use the Programme keys to mark the menu item
Position.
➜
Use the Volume keys to select Position A or B,
then press the OK key to store in memory.
The Satellite menu will display the menu item Matrix
instead of Position, providing the subsidiary options
Position and Option.
➜
Use the Programme keys to select the menu item
Matrix.
➜
Use the Volume keys to select Matrix 1 to 4 , then
press the OK key to store in memory.
➜
Use the RADIO/TV key to exit this menu, or use
the MENU key to return to the menu Sat-outdoor
unit.
The voltage of an LNB is usually 13/18V. If
you are using an installation with a star-form
distribution and multiswitches, the voltage
should be set to 14/19V. In the case of instal-
lations with serial distribution, so-called single
cable solutions, the LNB feed must be swit-
ched off.
➜
Use the MENU key to display the Main Menu.
➜
Use the Programme keys to mark the menu item
Programmes , then press the OK key to select.
➜
Use the Programme keys to mark the menu item
Sat-outdoor unit , then press the OK key to sel-
ect.
➜
Use the Programme keys to mark the menu item
LNB Supply.
➜
Use the Volume keys to set the LNB feed to
13/18V or 14/19V or OFF, then press the OK key
to store in memory.
➜
Use the RADIO/TV key to exit this menu, or press
the Programme keys to continue to the menu item
DiSEqC .
If the external unit is not fitted with DiSEqC
components, the DiSEqC function should be
switched off.
➜
Use the MENU key to display the Main Menu.
➜
Use the Programme keys to mark the menu item
Programmes , then press the OK key to select.
➜
Use the Programme keys to mark the menu item
Sat-outdoor unit, then press the OK key to sel-
ect.
➜
Use the Programme keys to mark the menu item
DiSEqC.
➜
Use the Volume keys to set the DiSEqC to OFF
or ON , then press the OK key to store in memory.
➜
Use the RADIO/TV key to exit this menu.
➜
Use the MENU key to display the Main Menu
➜
Use the Programme keys to mark the menu item
Language , then press the OK key to select.
➜
Use the Programme keys to mark the desired lan-
guage, then press the OK key to select and store
in memory.
➜
Use the RADIO/TV key to exit this menu.
Position DiSEqC off
Position DiSEqC on
DiSEqC
LNB Supply
Language