Technician Operations
81
The Installer Settings menu is displayed.
The following Installer operations are available from the Installer Settings menu:
Configure the Entry/Exit
delay periods (page
)
Configure the Alarm Trans-
mission delay (page
)
Configure the Swinger Shut-
down feature (page
)
Reset the TouchScreen to
factory defaults (page
Check for new firmware ver-
sions (page
Manage sensors and zones
(page
Create cross-zone asso-
ciations for sensors (page
)
Manage the camera (page
Manage the lighting devices (page
Manage thermostats (page
Manage key fobs (page
Manage key pads (page
)
Manage Panel Interfaces (page
)
Perform the RMA procedure (page
)
Reset your managed router (see the
TouchScreen User Guide
)
Allow or block an unmanaged router passing through the
iControl DMZ (see the
TouchScreen User Guide
)
Both customers and Installers can test the alarm capabilities by following the procedure described on
page
Testing Alarms
Installers can test the alarm system without going through the entire activation process.
To test alarms (after activation):
1. Call the central monitoring and tell them you are about to test the system.
2. From the Installers Settings app (see page
), tap
Security > Alarm Test
.
The Alarm Test Options screen is displayed.
